Teradek Bolt 1000 Transmitter and Receiver Rental
Tampa FL Teradek 1000 Rental
Litewave Media offers the Teradek Bolt 1000 transmitter and receiver rental for transmitting video feed onto a monitor wirelessly. This Teradek transmits uncompressed 1080p SDI and HDMI video over 1000 feet (within line-of-sight) wirelessly. The transmitter can connect with up to four receivers.
The Teradek has the ability to cross convert the video signal while being transmitted. The receiver features a built-in USB port that allows direct connection to a computer so video can be captured directly from the feed to make rough edits. The Teradek transmitter also allows 3D LUTs to be applied. It focuses the wireless signal and minimizes interference to maximize reception range.
Teradek Bolt 1000 Transmitter and Receiver Technical Specs
- Video Outputs:USB 3.0 micro B receptacle
75 Ohms BNC
Type A receptacle HDMI
- Color Sampling: SDI: YCbCr 4:2:2, 10-bit
HDMI: RGB 4:4:4, 8-bitDelay Tx To Rx<0.001sec
- Supported Resolutions: 1080p 23.98/24/25/29.97/30/50/59.94/60
480p59.94/576p50 (via HDMI ports only)
- Color Correction: CDL/1024 1D LUT
33x33x33 3D LUT
- Audio Compression: 48kHz 24-bit PCM
- Wireless: Non-DFS Frequencies:
5.19 – 5.23Ghz and 5.755 – 5.795Ghz
5.27 – 5.55Ghz and 5.67Ghz
- Range: Up to 1000′
Teradek Bolt 1000 Transmitter and Receiver Rental in Tampa Florida
To check out our other film equipment rentals like the 17” Flanders Scientific CM171 Monitor or lighting rentals, look at our St. Petersburg video equipment rental list << Here. Feel free to email or call us anytime for questions on video gear rentals or to reserve other film equipment and packages for your specific production. Check out our camera and monitor selection along with this transmitter and receiver set.